The CIC-152-N can monitor and control dosing and/or injection systems.

This unit will control 2 separate systems.

Dual Dosing/Injection TDS/EC Controller

SKU: CIC-152
    • TDS Range: 0 - 5000 ppm
    • EC Range: 0 – 9999 µS
    • Temperature Range: 1 - 80 °C; 33 - 176 °F
    • Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
    • Accuracy: +/- 2%
    • Conversion Factor: NaCl (avg. 0.5)
    • Calibration: Digital calibration by push button
    • Factory Calibration: 1413 µS
    • Set Points: Adjustable by push button
    • Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1)
    • The contacts are switched back to the normal position once the TDS returns to the acceptable range
    • Relay Voltage: 5V (attached devices must have their own power supply)
    • Alarm: Two independent alarms (set by user)
    • Display: Bright 5/8″ L.E.D. display
    • Probe: 1/2″ bushing (NPT), 3 meter (9.8 ft) shielded cable (model SP-1-PSC)
    • Power source: AC 110V / AC 220V
    • Large, bright tri-color L.E.D. display
    • Two adjustable set points keep TDS levels within a range
    • Minimum and maximum control points will activate relay controls via switching dry contacts
    • Can control two different devices (ex. a pump and a valve)
    • Two alarms (maximum and minimum levels) can be set independently of the control points
    • Digital calibration
    • On-screen temperature display
    • On-screen range & control indicator lights (green, yellow or red)
    • Includes one sensor probe
    • Available with the NaCl conversion factor